To Eliminate Vertical Bars [Clock]; To Remove Flickering Or Blurring; [Phase*]; To Correct Screen Position - Eizo FlexScan S2100 User Manual

4
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
●

To eliminate vertical bars [Clock]

(1) Display Pattern 1 in full screen on the monitor using the "Screen
adjustment pattern files".
(2) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
(3) Adjust the clock with
The adjustment is completed.
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
The adjustment is completed.
● To correct screen position [Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and press
The <Position> menu appears.
(2) Adjust the position with
properly in the display area of the monitor.
(3) Close Pattern 1.
10
Chapter 2 Settings and Adjustments
or , and press .
or , and press .
/ / / to display the image
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
.
Attention
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
"To eliminate vertical bars [Clock]."
(Clock → Phase → Position)
.