To Eliminate Vertical Bars [Clock]; To Remove Flickering Or Blurring [Phase*]; To Correct Screen Position [Position] - Eizo FlexScan S2231W User Manual

3
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
●

To eliminate vertical bars [Clock]

(1) Choose <Clock> from the <Screen> menu, and press
The <Clock> menu appears.
(2) Adjust the clock with
The adjustment is completed.
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and press
The <Phase> menu appears.
(2) Adjust the phase with
The adjustment is completed.
●

To correct screen position [Position]

Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and press
The <Position> menu appears.
(2) Adjust the position with
properly in the display area of the monitor.
or , and press .
or , and press .
/ / / to display the image
NOTE
• Press the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
.
proceed to [Phase] to remove
flickering or blurring.
Attention
• Flickering or blurring may not be
.
eliminated depending on your PC or
graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
"To eliminate vertical bars [Clock]."
(Clock → Phase → Position)
.
Chapter 2 Settings and Adjustments
13