Installing The Display Assembly - Dell Latitude E5520m Owner's Manual

Related Links

Installing the Display Assembly

1. Attach the display assembly to the base of the computer.
2. Tighten the screws to secure the display assembly.
3. Connect the low-signal differential signaling (LVDS) cable to the system board.
4. Connect the camera cable to system board.
5. Push the antenna through the opening to the bottom of the computer.
6. Secure the antenna cable to the routing channels.
7. Connect the antenna to the WLAN/WLAN cards.
8. Replace the
9. Replace the
10. Replace the keyboard.
11. Replace the
12. Replace the
13. Replace the
14. Replace the
15. Replace the battery.
16. Follow the procedures in
Related Links
Downloaded from www.Manualslib.com
Installing the Display Assembly
palm rest.
CPU door
keyboard trim.
optical drive.
hard drive.
back panel.
After Working Inside Your
Removing the Display Assembly
manuals search engine
Computer.
55