Info; Cleaning; Transmitter And Receiver; Earbuds - AKG IVM4500 IEM User Instructions

"L R 00" means the volume of both channels is the same.
In DUAL mode, you can set the balance between channel 1 ("CH1") and chan-
nel 2 ("CH2"). The display will indicate the volume of the louder channel in 12
increments.
"CH- 00" means the volume of both channels is the same.
3. To save your selection, press the Jog switch briefly.
• You can call up the balance screen even in LOCK mode by pressing the Jog
switch briefly. You can set and save the balance between the left and right chan-
nels or channels 1 and 2. However, you cannot toggle between STEREO and
DUAL modes.
You can call up the following details about your transmitter in this order:
- Firmware version (e.g., "F 2.30")
- Frequency band (e.g., "B 7.A5")
- Preset version (e.g., "P 1.76")
• To clean the transmitter and receiver surfaces, use a soft cloth moistened with
water.
1. Use a soft cloth moistened with water to clean the earbud surfaces.
2. To prevent infections, clean the ear molds with a skin compatible antiseptic be-
fore and after use.
4 Advanced Functions

5 Cleaning

IVM
4500
Note:

Info

IVM
4500
Transmitter and
Receiver

Earbuds

39