Getting Started Quickly - AKG IVM4500 IEM User Instructions

1
2
4
1. Make all audio connections.
2. Connect the antenna to the transmitter.
3. Connect the transmitter to power.
4. Insert the supplied batteries into the SPR 4500 receiver.
5. Select a clean frequency on the receiver ("AUTO" menu, section "Automatic
Frequency Selection").
6. Connect the earbuds to the receiver.
7. Tune the transmitter to the same frequency you selected on the receiver (sec-
tion "Selecting Frequencies from the Preset Screen").
8. Set RF output on the transmitter (sections on "Frequency Selection").
9. Set input gain on the transmitter (section "Setting Input Gain").
10. Set the desired volume for the earbuds.

Getting Started Quickly

3
6
IVM
4500
10
23