Service Adjustments With Beo4; Reset; Format - Bang & Olufsen BeoVision Avant 32 DVD MKII Repair Manual

5.2 Adjustments, English

SERVICE ADJUSTMENTS WITH Beo4

Reset

Format

FORMAT 1 (15:9)
FORMAT 3 (16:9)
showing a 4:3 picture
FORMAT 3 (16:9)
showing a 16:9 picture
See the section "Brief Operation Guide" for general information on operation.
Set brilliance, colour saturation and contrast to nominal values so that they can be
recalled by means of RESET (perhaps a ADD function).
- Press TV MENU 4 (or 3) then 3
Brilliance Colour
32 32
l n
- Adjust by means of ,
means of GO.
BeoVision Avant 32 DVD provides the opportunity to choose from three different
picture formats by means of the Beo4 remote control.
Format 1: For standard 4:3 TV pictures. Three views are available. 15:9, 14:9 and
m p
4:3. Press or to toggle between the three views.
Format 2: Letter box formats, the Format Optimize circuit chooses the optimal
format. It is possible to move the picture up or down by pressing
Format 3: 16:9 wide screen. Format 3 will usually be selected automatically, but it
can be selected manual.
"Picture adjustments" only have to be made in format 1 (15:9).
"Geometry adjustments" have to be made in format 1 (15:9, 14:9, 4:3) and
format 3 (16:9).
Selecting a format:
Press TV and toggle the LIST key until the Beo4 display reads FORMAT, then press
1, 2 or 3 to select a format.
Contrast
44
m p
, or , and back up with STOP. Values can be stored by
m p
or .