Repair Tips; Service Menu - Bang & Olufsen BeoVision Avant 32 DVD MKII Repair Manual

5.10 Repair tips, English

REPAIR TIPS

Service mode

Service menu

The service mode consists of two parts: Service menu and Bus ignore mode.
The service menu contains options such as picture and geometry adjustments -
see the section SERVICE ADJUSTMENTS WITH Beo4. In the following description
the Beo4 terminal is used for operating the product.
SERVICE MODE, thereby gaining access to the Service menu:
- Press TV MENU, and select the Setup line by means of the
GO 0 0 GO. It is possible to "go backwards" in the menus by pressing STOP.
Service mode is abandoned by pressing •.
Service menu
1 Monitor
2 TV-tuner
3 DVD
4 Chassis variant
In the service menu you can choose which source you wish to have information on
or wish to adjust/set up.
Select Monitor, press 1
Monitor service menu
1 Monitor information
2 Service counters
3 Picture adjustments
4 Geometry adjustments
5 Text Registers
6 WSS setting
7 Theft protection setting
8 Video signal info
9 PIP HW correction
(only if PIP is mounted)
10 Degauss position
11 Modulator system
12 Earth fi eld correction
(only in Avant 32 DVD)
In the Monitor service menu you can choose among the following items of
information:
(Picture, Geometry adjustments and Earth fi eld correction are described in the
section on adjustments).
p
key, and then press