Service Menus; How To Enter The Service Mode; Changing Tvm Data Settings; Writing Tvm Data - Sony KDL-32W5800 Service Manual

3-1. How to enter the Service Mode

Service adjustments to this model can be performed using the
supplied Remote Commander (See front cover).
1. Turn on the power to the TV set and enter into the stand-by
mode.
2. Press the following sequence of buttons on the Remote
Commander.
i+ 5
(ON SCREEN (DIGIT 5)
(ON SCREEN (DIGIT 5)
DISPLAY)
DISPLAY)
3. The TVM menu appears on the screen (See Pic.1).
Pic.1
TVM Service Menu
SERVICE
<Main> Program : 2.30.31
Boot : 1.27.40
Data : 0.122
<PQC> Pack : 0.517
<Mimas> Program : SM1.302W00AA
Boot : SB0.011W00AA
Data : SD1.212W00AA
Note :
 After carrying out the service adjustments, to prevent the
customer accessing the 'Service Menu' switch the TV set OFF
and then ON.

3-2. Changing TVM Data Settings

1. Press "2 / 5" on the remote commander to select (up / down)
category (See Pic.2).
2. Press "1 / 4" on the remote commander to select (up / down)
item (See Pic.2).
3. Press "3 / 6" on the remote commander to select (up / down)
data (See Pic.2).
Pic.2
TVM Service Menu
SERVICE
SECTION 3
+
I/
TV
(VOLUME +) (TV)
(VOLUME +)
(TV STANDBY)
000 VERSION
000 000 VERS
Category
001 MODEL
075 000 MDLIDO
Data Item

SERVICE MENUS

3-3. Writing TVM Data

1. Press "Mute" on the remote commander. The word "SERVICE"
changes to "WRITE" (See Pic.3).
Pic.3
TVM Service Menu
WRITE
2. Press "0" on the remote commander. The word "WRITE"
changes to red. This indicates writing is in progess. (See Pic.4).
Pic.4
TVM Service Menu
WRITE
3. When red "WRITE" changes to green "SERVICE".
This indicates writing is complete. (See Pic.5).
Pic.5
TVM Service Menu
SERVICE
- 15 -
001 MODEL
075 000 MDLIDO
001 MODEL
075 000 MDLIDO
001 MODEL
075 000 MDLIDO