Climatronic (Automatic Air Conditioning) - Skoda 2014 Rapid Spaceback Owner's Manual

Setting the direction of the air outlet
C
›
 Air flow to the windows
›
 Air flow to the upper body
›
 Air flow in the footwell
›
 Airflow over the windows and into the footwell
Switch recirculation on/off » page 90

Switch the cooling system on/off

Note
The warning light in the button  illuminates after activation, even if not all
■
of the conditions for the function of the cooling system have been met. By
lighting up of the warning light in the button, the operational readiness of the
cooling system is signalled.
During operation of the air conditioning, an increase in engine idle speed may
■
occur under certain circumstances in order to ensure sufficient heating com-
fort.

Climatronic (automatic air conditioning)

Fig. 94 Controls the Climatronic

Read and observe and
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the outflowing air, the blower stage and air distribution.
The system also takes sunlight into account, which eliminates the need to al-
ter the settings manually afterwards.
Individual functions can be set off or on by turning the knob or by pressing the
corresponding button. When switched on the display shows the corresponding
icon.
92
Using the system
» page 90
on page 89 first.
Functions of the various controls and display
Setting temperature
1
›
Lower temperature

›
Increase temperature

Selected temperature
2
Degrees Celsius or Fahrenheit
3
Automatic operation of the air conditioning system is switched on
4
Intensive windshield defroster switched on
5
Direction of air flow
6
Recirculated air mode activated
7
Cooling system activated
8
Set blower speed
9
Set the temperature (turn to the left: Reduce fan speed, turn to the right:
10
Increase blower speed)
Interior temperature sensor
11
Switching automatic mode on

Switching the intensive windshield defroster on/off - when this function

is switched on, the warning light illuminates in the button
Switching the airflow to the windows on and off

Switching the airflow to the upper body on and off

Switching the airflow to the footwell on and off

Switch recirculation on/off » page 90

Switch the cooling system on/off

After the cooling system is switched off, only the ventilation function remains
active, whereby the lowest temperature that can be reached is the outside
temperature.
Setting temperature
The set temperature value appears in the display (pos.
To switch between degrees Celsius and degrees Fahrenheit, the keys 
and  are to be pressed and held simultaneously.
The information appears in the display in the desired temperature measuring
unit (pos. » Fig. 94).
3
The interior temperature can be set between +18 °C and +29 ℃. The interior
temperature is regulated automatically within this range.
If you select the temperature below +18 ℃, "LO" appears in the display.
» Fig. 94
» Fig. 94).
2
