Variable Loading Floor In The Luggage Compartment (Estate); Double-Sided Floor Covering; Class N1 Vehicles - Skoda 2014 Rapid Spaceback Owner's Manual

Secure load
›
Remove the cargo elements in direction of arrow
›
Secure the cargo element with Velcro on the floor covering of the luggage
compartment » Fig. 84 - .
CAUTION
The cargo elements are designed for attaching loads with a maximum gross
weight of 8 kg.

Double-sided floor covering


Read and observe and
You can fit a double-sided floor covering in the luggage compartment.
One side of the double-sided floor covering is made of fabric, the other side is
washable (easy to maintain).
The washable side is used to transport wet or dirty items.
Note
For easier turning of the covering, use the loop attached.

Class N1 vehicles


Read and observe and
In class N1 vehicles that are not fitted with a protective grille, a lashing set that
complies with the EN 12195 standard (1 - 4) must be used for fastening the
load.
Proper functioning of the electrical installation is essential for safe vehicle op-
eration. It is important to ensure that the electrical installation is not damaged
during the adjustment process or when the storage area is being loaded and
unloaded.

Variable loading floor in the luggage compartment (Estate)


Introduction
This chapter contains information on the following subjects:
Setting in the upper position
Setting in the lower position
Removing/inserting
» Fig. 84 - .
on page 80 first.
on page 80 first.
Folding up/down
"Parking position"
The variable loading floor can be set to the upper or lower position.
For easier handling of the spare tire, for example, the variable loading floor can
be set to two positions » page
ing position".
CAUTION
The maximum permissible load of the variable loading floor is 75 kg. For the
transport of heavy loads, adjust the variable loading floor to the lower position
or remove it from the vehicle.
Setting in the upper position
Fig. 85 Set the variable loading floor to the upper position

Read and observe
The variable loading floor in the lower position can be set to the upper position
85
as follows.
86
›
Grasp the variable loading floor at handle
86
87, Folding up/down and » page
on page 85 first.
» Fig. 85.
A
Transporting and practical equipment
87
87
87, "Park-

85