Skoda 2014 Rapid Spaceback Owner's Manual page 89

›
Lift the variable loading floor in the direction of arrow
backwards in the direction of arrow
›
Lift the variable loading floor at the front, place onto corner
the direction of arrow until it clicks into place in brackets
3
›
Place the variable loading floor in direction of arrow
CAUTION
The variable loading floor cannot be set in the upper position when the lug-
gage compartment cover is in the "park position"
Note
When in the upper position there is space for storing items underneath the
variable loading floor.
Setting in the lower position
Fig. 86 Set the variable loading floor to the lower position

Read and observe on page 85 first.
The variable loading floor in the upper position can be set to the lower position
as follows.
86
Using the system
and move partially
1
.
2
and slide in
C
.
B
.
4
» page 83.
›
Grasp the variable loading floor at handle
›
Lift the variable loading floor in the direction of arrow
in the direction of arrow until it detaches from brackets
2
›
Place the variable loading floor onto the floor covering of the luggage com-
partment while tilted forward.
›
Push the variable loading floor in the direction of arrow
and until its front part is raised.
C
›
Place the variable loading floor in direction of arrow
CAUTION
The variable loading floor cannot be set in the lower position when the lug-
gage compartment cover is in the "park position"
Removing/inserting

Read and observe on page 85 first.
Removing
›
Grasp the variable loading floor at handle
›
Lift the variable loading floor in the direction of arrow
about 15 cm below the luggage compartment cover
B
›
Remove the variable loading floor from the vehicle by moving it in the direc-
tion of arrow .
2
Inserting
›
Grasp the variable loading floor at handle
›
Insert variable loading floor into the vehicle with the front portion tilted
about 15 cm beneath the luggage compartment
B
›
Then follow the same steps as when setting the upper position
the lower position » page 86 .
» Fig. 86.
A
and partially move
1
.
B
as far as it will go,
3
.
4
» page 83.
Fig. 87
Remove variable loading floor
» Fig. 87.
A
until its rear area is
1
» .
» Fig. 87.
A
cover» .
» page 85 or
