Replacing the windscreen wiper blades
Fig. 155 Windscreen wiper blade
Read and observe
on page 171 first.
Before replacing the windscreen wiper blade, put the windscreen wiper arms
into the service position.
Service position for changing wiper blades
›
Close the bonnet.
›
Switch the ignition on and off again.
›
Place the operating lever in position
wipers and washers.
Move the windscreen wiper arms into the service position.
Removing the wiper blade
›
Lift the wiper arm from the window in the direction of
›
Tilt the wiper blade to the stop in the same direction.
›
Hold the upper part of the wiper arm and press the securing mechanism
in the direction of arrow
.
2
›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Push the windscreen wiper blade to the stop until it locks into place.
›
Check that the windscreen wiper blade is correctly attached.
›
Fold the windscreen wiper arm back to the windscreen.
›
Turn on the ignition and press the lever into position
ing the windscreen wipers and washers.
Move the windscreen wiper arms into the home position.
172
Do-it-yourself
» page
66, Activating the windscreen
4
» Fig.
155.
1
.
3
» page
66, Activat-
4
Replacing the rear window wiper blade
Fig. 156 Rear window wiper blade
Read and observe
Removing the wiper blade
›
Lift the wiper arm from the window in the direction of
›
Tilt the wiper blade to the stop in the same direction.
›
Hold the upper part of the wiper arm and press the securing mechanism
in the direction of arrow
›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Push the windscreen wiper blade to the stop until it locks into place.
›
Check that the windscreen wiper blade is correctly attached.
›
Fold the windscreen wiper arm back to the windscreen.
A
on page 171 first.
1
.
2
.
3
» Fig.
156.
A