General settings - PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 29.
1
Enter the PSM settings.
SEL
dfIII
[Hold]
2
Select aPSM item.
3
Select or adjust the selected PSM item.
[Turn]
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
SEL
Indications
Item
Setting, [reference page]
(_ : Initial)
DEMO
• DEMOON
: The display demonstration will be activated automatically if no
Display
operation is done for about 20 seconds, [7].
demonstration
• DEMOOFF
: Cancels.
CLOCK DISP*l
• CLOCKON
: The clock time is shown on the display at all times when the power is
Clock display
turned off.
• CLOCK OFF
: Cancels; pressing DISP will show the clock time for about 5seconds
when the power is turned off, [7].
CLOCK HOUR
1-12
[Initial: 1(1 :00)], [7].
Hour adjustment
CLOCK MIN
00-59
[Initial: 00 (1 :00)], [7].
Minute adjustment
CLOCKADJ*2
• AUTO
: The built-in clock is automatically adjusted using the clock data
Clock adjustment
proVided via the satellite radio channel.
• OFF
: Cancels.
TIME ZONE*2. *3
-
: Select your residential area from one of the time zones for clock
Time zone
adjustment.
EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN,
CENTRAL
28