JVC KD-ADV5490 Instructions Manual page 31

Item Setting
4:3 LETIERBOX 4:3 PAN SCAN
: Select to apply the effect to multi-channel
encoded software (excluding l-channel and
2-channel software).
• ON : Select to always use this function.
You can enjoy apowerful sound at low or middle volume levels while playing a
Dolby Digital software.
• AUTO
When playing back amulti-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when "PCM
ONLY" is selected for "DIGITAL AUDIO OUTPUT").
• SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
• STEREO : Normally select this.
• STREAMlPCM
• DOLBY DIGITAUPCM
Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
• OFF : Cancels.
• PCM ONLY : Select for an amplifier or adecoder incompatible
with Dolby Digital, DTS, MPEG Audio, or when
connecting to arecording device.
: Select for an amplifier or adecoder compatible
with Dolby Digital.
: Select for an amplifier or adecoder compatible
with Dolby Digital, DTS, and MPEG Audio.
16:9
.. Select the on-screen bar position on the monitor.
. • 1 : Higher position
;. 2 : Lower position (Guidance below the disc setup menu will disappear.)
FILE TYPE (DISC)' Select playback file type when adisc contains different types of files.
'. AUDIO : Play MP3IWMAIWAV files.
• VIDEO : Play DivX/MPEG Video files.
• AUDIO + VIDEO
: Play MP3IWMAIWAV/DivX/MPEG Video files.
OSD POSITION
DivX';
This unit has its own Registration Code. Once you have played back adisc in which
.REGISTRATION;,:!
the Registration Code recorded, this unit's Registration Code is overwritten for
.... ii;
copyright protection.
MONITOR TYPE .' Select the monitor type to watch awide screen picture on your monitor.
SETIINGS
31