Table of Contents
Advertisement
4.3 Status Button
Selecting the Status button will bring up the status panel as shown below. Included in the status panel is:
1. A listing of the Selected PIDs
2. The current ATSC channel number
3. The Signal to Noise Ratio of the received signal
4. The Default Gateway IP address, and
5. A checkmark indicating that Multicast Filtering (IGMP) is enabled (or not)
NOTE:
It is important to note that the status panel shows the user the current the
current configuration parameters that are programmed into the A75. These
parameters may or may match the configuration parameters that are present in
the A75 Configuration application.
Version: 1.02
Figure 13 - A75 Status Screen
Confidential and Proprietary
24 of 32
Advertisement
Table of Contents
