Table of Contents
Advertisement
4.1.3 Content Button
The Content button screen (shown below) is to be used when the A75 is to be configured to receive MPE or
video data from the ATSC broadcast stream and forward this data to the appropriate IP address on the LAN.
This screen is used to add (or delete) MPE Data Program IDs (PIDs) or elementary stream PIDs that enable
the A75 to receive the IP or MPEG content.
1. Enter PID Value: Use this edit box to add a new Program ID to the list;
2. Decimal: Use this check box to enter the PID values in decimal as the default
3. HexDecimal: Select this check box to enter the PID values in Hexadecimal as the default
4. Video PID – Highlight one of the PID's and check this box to change the PID type from PID to a
video PID. See Section 4.1.3.1 for further information
5.
Selecting this PID Add icon adds the content of the PID box to the PID List
6.
Selecting the PID Delete icon deletes the selected PID from the PID list
Version: 1.02
Figure 6: IP Data Content PIDs
Confidential and Proprietary
16 of 32
Advertisement
Table of Contents
