Table of Contents
Advertisement
7.
Selecting the PID Delete All icon will empty the PID list
8.
Selecting the Check icon will send the PID changes to the A75 receiver
9.
Selecting the X icon cancels the changes and exits back to the main screen
-
NOTE:
Older builds of the A75 (Build A0100) do not support the addition of video
PID's and therefore the Video PID box is not displayed in the Content screen
4.1.3.1 Adding Video PIDs
Any of the PID's added in the section above (Section 4.1.3) may be configured and received as an ATSC
elementary stream PID (versus an MPE PID) and passed directly to an IP address (multicast, unicast or
broadcast) on the A75 LAN. This feature enables the operator to pass television program PIDs (including
audio, video and MPEG Service Information (SI) PID's) on the LAN for viewing. Section below provides a
detailed description of how to configure the A75 to receive TV signals and how to setup an incoming PID as a
video PID.
To start with, you simply select the PID and check the Video PID box. This will bring up the Video PID
Screen as shown below.
Version: 1.02
Confidential and Proprietary
17 of 32
Advertisement
Table of Contents
