Frequency Edit - Telex RadioCom BTR-700 Operating Instructions Manual

Frequency Edit

(User-Programmed Groups Only)
This menu only occurs for user-programmable groups or when
copying to a user-programable group. The Frequency Edit
screen allows the user to set the group transmit frequency and
receive channel frequencies of a user-programmable group.
•
Press [MENU] three times to go to the frequency select
screen from the operating screen. Press [SET] to start the
group number flashing. This screen allows the user to set
the group and frequencies of user-programmed groups
only.
•
Press the [UP] / [DOWN] arrows to change the
groupnumber. The frequencies listed will reflect what is
currently in that group. Dashes will be displayed in any
slots that are not defined yet. Pressing [SET] will select
the group and start the selecting of frequencies within that
group. The Tx frequency will start flashing.
•
Pressing the [UP] / [DOWN] arrows will change the fre-
quency of "Tx" in 25kHz steps. Pressing [SET] will ac-
cept the change and start you editing Ch1. If you had not
hit the arrow keys when the frequency was flashing, but
instead press [SET], you would have skipped to the next
frequency to edit.
•
After editing the transmit and the receive channel fre-
quencies, pressing [SET] will save that last frequency and
send you over to the beginning of the group/frequency
select screen with nothing flashing. NOTE: Once the end
of the displayed channel list is reached, the last displayed
channel location will scroll to allow the user to edit the re-
maining channels.
•
After action has occurred in the frequency edit screen hit-
ting [MENU] will take you one menu back to the
group/frequency select screen so that the user may see
what frequencies the base receivers are now on. If no ac-
tion had occurred, then pressing [MENU] will take you to
the operating screen. NOTE: Besides a group change, any
editing that occurs within this screen to frequencies
DOES NOT take effect until the user exits the screen via
setting the last channel or pressing [MENU].
Frequency Edit
(User-Programmed Groups Only)
Group 25u
Freq Edit
T1
Tx
565.350
Group 27u
Freq Edit
T1
Tx
567.800
Group 27u
Freq Edit
T1
Tx
569.350
T1
Group 27u
T1
Tx
569.350
END
6-8
705.150
Ch1
2 707.850
3
710.100
4
715.300
[UP] / [DOWN]
[SET]
705.150
Ch1
2 707.850
3 710.100
4
715.300
[UP] / [DOWN]
[SET]
Ch7 718.550
8
720.550
9
721.350
10
721.900
[SET] or [MENU]
(Last Ch Changed)
R1
705.950
2 710.550
3 714.225
4
716.800