Installing The Power Supply Unit Blank; System Battery; Replacing The System Battery - Dell PowerEdge T630 Owner's Manual

Figure 42. Removing and installing the power supply blank
1. power supply blank

Installing the power supply unit blank

Install the power supply unit blank only in the second power supply unit bay.
To install the power supply unit blank, align the blank with the power supply unit bay and push it into
the chassis until it clicks into place.

System battery

Replacing the system battery

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the
battery only with the same or equivalent type recommended by the manufacturer. See your
safety information for additional information.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Locate the battery socket. For more information, see
Safety instructions.
Before working inside your
2. power supply bay
system.
System Board Connectors.
109