Connecting Other Equipment; Adjusting The Voltage Selector - JVC GVT0116-003B Instructions Manual

Jvc micro component system instruction manual
Table of Contents

Advertisement

• DO NOT connect speakers while the power is on.
• DO NOT connect more than one speaker to each
speaker teminal.
IMPORTANT: Use only speakers with the same speaker
impedance as shown on the speaker terminals on the
rear of the unit.
To remove the speaker grilles
The speaker grilles are removable.
Holes
To remove the speaker grille, insert your fingers at the top
of the speaker grille, pull towards you. Then pull the bottom
towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.

Connecting Other Equipment

To connect an audio equipment
You can connect audio equipment—used only as a playback
device.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.
To audio output
Projections
Speaker grille
R
L
AUX
R
L
L
Audio
equipment
R
For playing other equipment through this unit, connect
between the audio output jacks on the other equipment and
AUX jacks by using audio cords (not supplied).
To connect a TV set
You can connect a TV with a video input jack: used as a
monitor for video CD playback.
Auxiliary Equipment
TV
To video input

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your
area with the voltage selector on the rear of the unit.
VOLTAGE
SELECTOR
230V
-240V
220V
127V
110V
Use a screwdriver to rotate the voltage selector so the voltage
number the voltage mark is pointing at is the same as the voltage
where you are plugging in the unit. (See the back cover page.)
DO NOT plug in before setting the voltage selector
on the rear of the unit and all connection
procedures are complete.
Now, you can plug the AC power cord.
• If the wall outlet does not match the AC plug, use the
supplied AC plug adaptor.
IMPORTANT: Be sure to check all connections to be
done before plugging the AC power cord into a wall outlet.
ANTENNA
AM EXT
R
L
AM LOOP
AUX
FM
75
COAXIAL
VOLTAGE
SELECTOR
RIGHT
LEFT
RIGHT
LEFT
230V
-240V
220V
127V
110V
MAIN SPEAKERS
SUBWOOFERS
CAUTION: SPEAKER IMPEDANCE 6
- 16
Voltage mark
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

=ux-j55vUx-j66v

Table of Contents