Programming The Playing Order Of The Tracks -Program Play; Playing At Random-Random Play - JVC GVT0116-003B Instructions Manual

Programming the Playing Order of the Tracks
—Program Play
You can arrange the order in which tracks play before you
start playing. You can program up to 50 tracks.
On the remote control ONLY:
1
Load a disc.
• If the current playing source is not the CD player,
press CD 3/8, then 7 before going to the next step.
2
Press PRGM (program).
The PRGM (program) indicator lights up on
the display.
ST
PRGM
• If a program has been stored in memory, the program
is called up.
3
Press UP or DOWN to select the
track number, then press SET.
• You can select the track number directly
using the number button(s). (See "To go
to another track directly using the
number buttons.")
ST ST
PRGM
Track number Program step number
4
Repeat step 3 to program other tracks you
want.
5
Press CD 3/8.
The tracks are played in the order you have
programed.
If you try to program a 51st track
"FULL" will appear on the display.
To stop playing, press 7.
To exit from Program Play, press PRGM (program) before
or after playing.
• The PRGM (program) indicator goes off.
17
To check the program contents
You can check the program contents
by pressing ¢ or 4 before or
after playback.
• ¢ : To check the contents in the programmed order.
• 4 : To check the contents in the reverse order.
To modify the program
On the remote control ONLY:
Before or after playing, you can erase the last
programed track by pressing CANCEL.
• Each time you press the button, the last
PRGM
programed track is erased from the program.
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 3 of the
programming procedure.
To erase the program, press 7 before or after
playing.
• Disc ejection also erases the program.
UP
If additional track cannot add into the program list,
repeat from step 1.
DOWN
Playing at Random—Random Play
SET
The tracks will play in no particular order when you use this
mode.
On the remote control ONLY:
1
Load a disc.
• If the current playing source is not the CD player,
press CD 3/8, then 7 before going to the next step.
2
Press RANDOM.
CD
/SELECT
The RANDOM indicator lights up on the
display.
3
Press CD 3/8.
The tracks are randomly played.
Random Play ends when all the tracks are
played once.
To skip the current track, press ¢.
• You cannot go back to the previous track by
pressing 4.
PRGM
To stop playing, press 7.
To exit from Random Play, press RANDOM before or after
playing.
Random Play is canceled and Normal Play resumes.
• The RANDOM indicator goes off.
PREV. NEXT
CANCEL
RANDOM
CD
/SELECT
NEXT