Basic Disc Operations - JVC GVT0116-003B Instructions Manual

Jvc micro component system instruction manual
Table of Contents

Advertisement

I For MP3 discs
1
Load a disc.
The unit searches for the disc (it may take some time),
and the following information appears on the display
(the group title will scrolls on the display).
Group title of the first group (scrolling)
Group number flashes
2
Press ¢ NEXT or PREV 4 (or ¢
NEXT/PREV 4 on the remote control) to
select a group you want, then press CD 3/8.
The group number, track number and track title will
scroll on the display.
Track title of the first group (scrolling)
3
Press ¢ NEXT or PREV 4 (or ¢
NEXT/PREV 4 on the remote control) to
select a track you want to start playback with,
then press CD 3/8 again.
Only a maximum of 14 characters (including spaces between words)
can scroll on the display. The exceeding characters will be ignored.
To stop playing, press 7.
To remove disc, press 0 for the corresponding disc tray.
Track number
Track number flashes
• If the CD cannot be read correctly (because it is scratched, for
example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no CD is inserted
"NO DISC" appears on the display.
DO NOT try to open or close the CD tray by hand
as it will be damaged.

Basic Disc Operations

While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD 3/8.
While pausing, the elapsed playing time flashes on
the display.
To resume playing, press CD 3/8 again.
To go to another track
Before or during play, press ¢ or
4 repeatedly.
• ¢ : Skips to the beginning of the
next or succeeding tracks.
• 4 : Goes back to the beginning of the current or previous
tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or during play allows
you to start playing the track number you want.
Ex.:
For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
To locate a particular point in a
track
During play, press and hold ¢ or
4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
CD
/SELECT
PREV.
NEXT
1
2
3
4
5
6
7
8
9
10
+10
PREV.
NEXT
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

=ux-j55vUx-j66v

Table of Contents