Connecting Other Equipment; Cancelling The Display Demonstration - JVC SP-MXK5 Instructions For Use Manual

Connecting Other Equipment

You can connect an audio equipment.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect an analog component
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
To audio output
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX IN jacks by using audio cords (not
supplied).
Downloaded From Disc-Player.com JVC Manuals
NOW, you can plug in the unit and other
connected equipment FINALLY!

Cancelling the Display Demonstration

When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
On the unit ONLY:
To cancel the display demonstration, press
DEMO.
AUX IN
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it by pressing DEMO.
Audio/video
To start the display demonstration manually
equipment
Press and hold DEMO again for more than
2 seconds.
When you press other buttons
CANCEL
/DEMO
CANCEL
/DEMO