Screen/Lighting Setting; Setting The Brightness Of The Backlighting; Button Backlighting Adjustment; About Menu - Alpine iLX-007 Owner's Manual

Screen/Lighting Setting

Setting the Brightness of the Backlighting

Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto (Initial setting) / On / Off
Auto: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
On: Keep the background illumination of the monitor dark.
Off: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
• When "Auto" or "On" is set, the setting is also applied for the button
lighting in "Button Backlighting Adjustment" (page 21), and
"Display Backlighting Adjustment" (page 21).

Button Backlighting Adjustment

You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Illumination Level
Setting level: -2 to +2 (Initial setting: 0)

Display Backlighting Adjustment

You can adjust the brightness of the backlight. This function could be
used, for instance, to change the screen brightness while traveling at
night.
Setting item: Screen Dimmer Level
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.

Changing the Opening Image

You can set the image file for the opening screen. Copy your desired
image file from a USB memory device.
Setting item: Opening Customization
Setting contents: Default (Initial setting) / User
The file selected in the User mode will be copied according to the
following procedure.
1
Connect the USB memory device which contains the
BMP file to be copied to the unit.
2
After the confirmation message is displayed, touch
[OK].
The Opening image is changed.
Copiable image files
File format: BMP
Image size: 800 × 480 pixels, RGB 24 bit or less
Folder Name: OPENINGFILE
File Name: openingfile.bmp

About iLX-007

Touch [About] on the General setup menu in step 3. Refer to "General
Setup Operation" (page 19).

Displaying the Product Information

You can view the model name, serial number and version information of
this product. Make note of the version information and refer to it
whenever you contact Alpine Tech Support or an Alpine-authorized
dealer.
Contents: iLX-007 (model name) / Serial Number / Firmware
Version

Initializing the System

You can initialize all data, to restore the factory settings. Remove the
USB Flash memory, from the system before operation
Setting item: Clear All Settings
1
Touch [RESET] of "Clear All Settings".
2
After the confirmation message appears, touch
[OK].
The system starts initialization.
• Do not turn on/off the power, change the ignition key position or
remove the screen panel until system restart is completed.

Demonstration Setup

[Demo mode] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 19).

Canceling the Demonstration

This unit has a Demonstration feature for the display. When you install
and use the unit for the first time, the unit will enter demo mode
automatically. To quit demo mode, turn off the Demo mode.
Setting item: Demo mode
Setting contents: OFF / ON (Initial setting)
• If you perform an operation during the Demo mode, the
demonstration is temporarily stopped.
21
-EN