Table of Contents
Advertisement
• You can select [Mix 1 & 2 Sided] and [Divide] at the same time. However, the function selected last
has priority.
• To switch the scan setting for additional originals to [1 Sided Original] after scanning one side of the
last page of a batch of two-sided originals, press [Change Setting], and then press [1 Sided Original].
• One-sided and two-sided originals are usually output to different trays. However, if you select [Mix
1 & 2 Sided], all originals are output back side up (reversed) to the same tray. This allows you to
check the scanning order, regardless of whether they are one-sided or two-sided originals.
• p.135 "Batch, SADF"
• p.138 "Scanning Multiple Pages of Originals as One File"
Thin Paper
This section explains settings for preventing thin originals being damaged when they are fed from the ADF
for scanning.
1.
Press [Original Feed Type].
2.
Press [Thin Paper].
3.
Press [OK].
Batch, SADF
This section explains the settings you need to configure if you want to scan a large number of originals in
several batches and send them together as a single job.
To scan originals in several batches using the [Start] key, select [Batch].
To scan originals individually in the ADF, select [SADF].
Setting of Original Feed Type
6
135
Advertisement
Table of Contents
