6. Various Scan Settings
Setting of Original Feed Type
This section explains Original Feed Type settings such as orientation and scan sides of originals.
Original Orientation
This section explains how to correctly display the top/bottom orientation of scanned originals on a client
computer screen.
1.
Press [Original Feed Type].
2.
In [Original Orientation], press [
you have placed. If you press [Reverse Orientation], [
6
3.
Press [OK].
Placing originals
To correctly display the top/bottom orientation of the scanned original on a client computer, the placement
of the original and the settings made on the control panel must match.
Place originals correctly by referring to the following table:
Exposure Glass
Place the original face down on the exposure glass in either the left-right (landscape) or up-down
(portrait) orientation.
Original orientation and control panel key selection
top edge touches rear of exposure glass
130
Original orientation
] or [
] according to the orientation of the original
] and [
Control panel key
(Reverse Orientation: OFF)
] are also available.