Detail Settings - Oce VarioLink 2222c User Manual

7

Detail Settings

Configure the density or color of the newly registered or overwritten overlay image.
%
Select the button of a target overlay image, and press [Detail Settings]. After configuring settings, press
[OK].
Item
[Density]
[Color]
7-80
Description
Specify the density of the image. Use the keypad to enter the density using a value
between 20 and 100%.
Specify the color of the overlay image.
[Full Color]: Prints a document in full color.
[Black]: Prints a document in black and white.
Application 7.8
VL3622c/VL2822c/VL2222c