Installation Instructions; How To Install Of The Washing Machine - Daewoo DWF-7560 series Service Manual

4. INSTALLATION INSTRUCTIONS

HOW TO INSTALL OF THE WASHING MACHINE

SELECTION OF THE INSTALLING PLACE
• Choose a place on a horizontal
solid floor. When the washer is
installed on unstable floor, it
makes noise and vibration.
• Coal gas may cause corrosin.
IN CASE THAT THE WASHER IS INCLINED
Insert the Height
¡
Adjust Rubber
ƒU Insert the 'height adjust rubber' to
the inclinded direction. It can be
adjusted as far as 30mm.
• Don't choose a floor where direct
rays of the sun.
Because the washing machine's
color becomes different.
• Don't install in the place where it is
anxious about being frozen in
winter.
™
Height Setting
ƒU Control the height by turning the
adjusting leg. After that turn the
outer cap to be locked.
• Don't turn the adjusting leg to be
separate.
Height
Adjust
Rubber
• Avoid installing it in a place where
* NOTE
When the washer is installed on an unsuitable floor, it makes noise
and vibration and occures out of order.
ƒU Check the position at the front
Lock
Loose
14
it can be exposed to rain that may
cause it rust and leak.
The opening must not be
obstructed by carpeting when the
washing machine is installed on a
carpeted floor.
£
Check the Horizon
center of the washer.