9. DIRECTIONS FOR DISASSEMBLY AND ADJUSTMENT
WARNING
BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE WASHING MACHINE, DISCONNECT THE
POWER CORD FROM THE ELECTRIC OUTLET.
GEAR MECHANISM ASS'Y REPLACEMENT
• Raise the top plate on the outer cabinet.
• Loosen four screws mounting outer tub cover and
remove outer tub cover from the tub ass'y.
Outer tub cover
• Remove the pulsator washer.
• Remove the spinner shaft flange nut by using 'T'
type box wrench.
"T" type box
• Lay the front of the washer on the floor.
• Remove four bolts mounting the plate-gear protect
by using a box wrench and remove plate-gear
protect.
• Remove the V-belt.
Washer
NOTE: To assemble the gear mechanism ass'y, reverse the disassembly procedure.
Mounting
screw
wrench
Washer
Nut-spin
shaft fixing
Mounting bolt
• Loosen the pulsator mounting screw and remove
pulsator.
Pulsator Mounting screw
• Remove the tub ass'y.
Pulsator
Nut-spin shaft fixing
Washer-spin
shaft fixing
• Remove four bolts mounting the gear mechanism
ass'y by using a box wrench.
• Pull out the gear machanism ass'y.
Gear mechanism
ass'y
32
Tub ass'y
Mounting bolt