Accessing Components Behind
The following major components are serviced by removing
the storage drawer:
- Cooling Fan
- Burner Valve & Pressure Regulator
- Ignitor Module
- Double Line Break (DLB) Relay (Electric Only)
FAN RELAY
COOLING FAN
HOUSING
FIGURE 9
Removing The Storage Drawer
Electric Models
Refer to Figures 9 or 10 for the following steps.
1. Unplug the range's power cord plug from the AC receptacle.
2. Remove the storage drawer from the range.
3. From inside the storage area, remove the three mounting screws
from the housing.
4. Remove the housing by sliding it forward and unhooking the tab from
the slot in the bottom of the range.
The Storage Drawer
STORAGE DRAWER
- 28 -
PRESSURE
REGULATOR
IGNITOR
MODULE
COOLING FAN
HOUSING
FIGURE 10
Removing The Storage Drawer
Gas Models
STORAGE DRAWER