Convection Fan Motor - KitchenAid KESS300B Reference Manual

Accessing Components Behind
The following major components are serviced by removing
the component and access covers:
- Locking Solenoid

- Convection Fan Motor

- Temperature Sensor (Freestanding Models Only)
Refer to Figure 8 for the following steps.
1. Disconnect the power cord plug from the AC receptacle.
2. Pull the range out from the wall or cabinet cutout far enough to
access the back panel.
3. Remove the three screws from the component and access covers
that are mounted to the rear panel, then unhook and remove the
covers.
The Rear Panel
TABS
COMPONENTS
COVER
Accessing Components Behind
The Rear Panel
TAB
ACCESS
COVER
FIGURE 8
- 27 -
REAR
PANEL
PANEL
MOUNTING
SCREWS (3)