The Control Panel - KitchenAid KESS300B Reference Manual

Accessing Components Behind
The following major components are serviced by removing

the control panel:

- Computer Board
- Capacitive Glass Panel
- Cooling Fan Thermal Switch
END CAP
SCREW
(On Slide-In Models Only)
Refer to Figure 6 for the following steps.
1. Unplug the power cord plug from the AC receptacle.
2. Open the oven door, and remove the three screws from under the
control panel and the two from the end caps, then close the oven
door.
3. On gas models, remove the four (4) burner valve stem nuts.
4. Lift the control panel and set it on the maintop so that you can access
the components.
The Control Panel
FIGURE 6
Removing The Electric Range Control Panel
- 25 -
- Burner Valves & Switches
- Hi Limit Thermal Switch
END CAP
SCREW
(On Slide-In Models Only)
CONTROL PANEL
ELECTRONICS
BOARD
CONTROL PANEL
SCREWS (3)