Table of Contents
Advertisement
Up to 6 stations each can be saved in the FM1, FM2, AM1 and AM2 preset station memories.
Manual Preset
Memory
Manually save a station in
the preset memory
Auto Preset
Memory
Automatically save strong
stations in the preset
memory
Note: New stations are overwritten on existing saved stations after following this procedure.
Preset Station
Calling
One-touch selection of a station
Select a band and frequency (step q, w and e on the previous page)
Press and hold [1] to [6] on the remote control for more than 2 seconds.
The frequency blinks once, and
a receiving station is saved in
the memory.
Select a band (step q, w on the previous page)
Press and hold [ENTER] for more than 2 seconds.
¡The 6 strongest available stations will be automatically saved in the memory
under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5 seconds each.
¡To stop the scanning, press [1] to [6] on the remote control.
Select a band (step q, w on the previous page)
Press [1] to [6] on the remote control.
CA-TU7000U
E
N
G
L
I
S
H
10
19
Advertisement
Table of Contents
