Panasonic CA-TU7000U Operating Instructions Manual page 24

q Press [[] , []] , [}] or [{] to select and
3
adjust.
w Press [ENTER] to set. (for NAVI SET UP)
IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER
VOLUME
MUTE MENU
The monitor position setting menu can also be displayed by pressing the [TILT] button on the display unit
for more than 1 second. (For details, refer to page 15.)
Tilting angle adjustment :
Front-rear position :
Notes:
¡For smooth adjustment, make sure to first return the lateral
angle to the neutral position and then adjust the tilt angle.
¡Front-rear position "REAR" and tilt angle "5" cannot be selected at the same time.
NAVI IN
RGB : Connected to the RGB input cord, or a car navigation system not connected
VTR1 : Connected to the VTR1-IN
: Connected to the VTR2-IN
VTR2
NAVI VOLUME
: The sound that a Panasonic car navigation system (not available yet) generates does not come out.
0
1 2 3 4
low
NAVI MUTE(dB)
Select the mute level of this unit during the voice
guidance from the Panasonic car navigation system
(not available yet).
Preparation : Connect the navi mute cord.
[}] [{]
CY-VMC7000U
[]] [[]
(Select and Adjust)
DISC/BAND
NAVIGATION ASPECT
TRACK/
ENTER
ENTER
YUNE
MODE NAVI ASP [ENTER]
POWER P·MODE
1 2 3 4
FRONT REAR
Navigation Input
Navigation Volume
: Volume level
5
high
Navigation Mute Level
Notes:
¡Press [MODE] to return to the regular mode.
¡The display returns to the previous one if there is no
operation for more than 60 seconds after changing
to the setting / adjusting menu.
[MODE]
Tilt Angle
1 to 5
5
[{]
0 : Unchanged
–10 : Decrease to 1/3
–20 : Decrease to 1/10
∞
: No sound
–
[}] [{]
[]] [[]
(Select and Adjust)
[ENTER]
[MENU]
Front-Rear Position
Front Rear
[}]
[]] [[]
CA-TU7000U
E
N
G
L
I
S
H
22
31