Installation; The Components; L.p.g. Installation - Bavaria Cruiser 33 Owner's Manual

Sailing yacht "Bavaria Cruiser 33"

2.6 L.P.G. installation

The gas installation for the stove meets the European norm EN 10239. The test-certificate is attached.
The gas pipe leading to the stove from the standard 3 kg–gas cylinder is an 8 mm copper pipe. It is placed
into a self-bailing casing moulded into the deck in the rear cockpit area. All gas pipes have been installed
according to the German safety regulations. The best-by date for the soft connection hoses between the gas
cylinder and the copper pipe and between copper pipe and stove is printed onto the hoses. They have to be
replaced after the expiry date.
The reducing valve in the gas cylinder casing has a service pressure of 30 mbar. The flow rate is 1 kg/h.

2.6.1 The components

Leakage Test of LPG System
- With appliance valves closed!
-
-
-
-
-
- Do not use LPG system until leak is repaired!
1 Gasflasche mit Reduzierventil
Kocher mit Backofen
2
3 Gummischlauch
Gaskugelhahn
4
Kupfer Rohr
5
Open the cylinder valve, close the cylinder valve.
Allow indicated gauge pressure to stabilize.
Observe pressure on gauge for 3 min.
If pressure remains constant, no leak is present.
If pressure falls, a leak exists.
Gas tank with valve
Gas stove with oven
Rubber hose
Gas stop valve
Copper tube
33 of 49
Bavaria Yachtbau GmbH