Orban OPTIMOD-PC 1100 Operating Manual page 86

2-32
INSTALLATION
•
The output of the direct mixer
•
The output of the OPTIMOD-PC audio processing that follows all processing
except final peak limiting
•
The output of the OPTIMOD-PC audio processing that follows all processing,
including peak limiting.
The "processed without limiting" output can provide a low-delay moni-
tor feed back to live talent headphones because it has significantly lower
throughput delay than the "processed with limiting" output. Because the
look-ahead limiter contributes most of the time delay through the sys-
tem, listening from the output of the multiband compressor (ahead of
the look-ahead limiter) can be more comfortable to a DJ or presenter
who is monitoring his or her voice live through headphones.
Each of the three outputs has an attenuator and a stereo peak-reading meter,
which indicates the post-attenuator level.
A) Using the drop-down menu, choose the source that feeds each output.
B) Set the output level of each output as desired, using its attenuator.
See the notes under step 2 on page 2-27 for more information on head-
room and calibrating for unity input/output gain.
Refer to Setting Output/Modulation Levels on 1-29 of this manual for ad-
vice on setting output levels and on their relationship to headroom.
C) If you wish to save the entire setup (that is, the settings of all controls in all
Figure 2-10: Output Levels Page in I/O Mixer
ORBAN MODEL 1100