Table of Contents
Advertisement
1-12
INTRODUCTION
User Processing Presets
You can change the settings of a Factory Processing Preset, but if you want to pre-
serve your changes, you must then store those settings as a User Preset, which you
are free to name as you wish. User presets can also be created by editing existing
user presets and saving the results under a new name.
The suffix of User Presets is
Because of the major structural changes in the DSP processing between
Optimod-PC version 1.x and version 2.x, user presets created under ver-
sion 1.x cannot be loaded into Optimod-PCs with version 2 software. If
you rely on user presets created with version 1.x software, we do not rec-
ommend that you upgrade to version 2. However, failing to upgrade will
prevent you from taking advantage of version 2's improved features, in-
cluding improved AGC, more versatile equalization, and low-IM look-
ahead limiting. For this reason, it is often worthwhile to create new user
presets.
The suffix of version 1.x user presets is
You can store as many User Presets as the OPTIMOD-PC card's host computer hard
drive and operating system can accommodate. User Presets are shown on the "Open
Preset" list by the name that you gave them when you saved them.
You can name them as you wish, limited only by the file naming limits in your oper-
ating system.
Do not use a suffix; .
The default folder containing User Presets for a given OPTIMOD-PC card is
c:\Program Files\Orban\OPTIMOD-PC\[card serial number]\presets
set that you create while working with a given card is available only for that card.
To make the preset available to a second card, copy the preset file to the appropri-
ate presets folder located under the second card's serial number.
If you want to back up a user preset, use the standard Windows file copy mechanism
to copy it from its current folder into a backup folder you have made.
If you want to delete a user preset, use Windows to delete the preset's associated
file.
*.ORB11USER
User Presets cannot be created from scratch. Start by recalling a Factory preset. You
can then immediately store this in a new User Preset (with "Save As" from the FILE
menu), give it whatever name you wish, make changes to the settings as desired,
and then save it again. Alternatively, you can recall a Factory preset, make the
changes first, and then store this as a User Preset. Either way, the Factory preset re-
mains for you to return to if you wish.
You can also modify an existing User Preset.
. The Factory preset remains unchanged.
ORB11USER
ORBU
will be added automatically.
ORBU
ORBAN MODEL 1100
.
. A user pre-
Advertisement
Table of Contents
