Adjust The Analog L/R Input Balance Control. (Optional) - Orban OPTIMOD-PC 1100 Operating Manual

Digital audio processor on a pci sound card
Table of Contents

Advertisement

2-30
INSTALLATION
a) In the I/O Mixer, click the C
b) Click the P
ROCESSOR MIXER
c) Set the A
NALOG
–20dBfs.
For more information, refer to the notes under step 1 on page2-27.
d) Note the setting of the A
and set the A
e) Skip to step 5 on page 2-30.
C) Calibrate using program: Feed normal program material to OPTIMOD-PC's
analog input.
[Skip this step if you are using tone to calibrate OPTIMOD-PC to your
standard studio level—see step (B) above.]
a) Play program material from your studio, peaking at the level to which you
normally peak program material (typically 0 VU if your console uses VU
meters).
b) In the Mixer application, click the C
c) Verify that AGC is set to E
Refer to step (3.C) on page 2-22.
d) Click the P
ROCESSOR
e) Set the A
NALOG
the main meter screen in the Orban Control application) indicate an
average of 10 dB gain reduction when normal levels are applied to the
OPTIMOD-PC's analog input.
If necessary, drag the Mixer window so that the AGC G
ter is visible.
If the AGC gain reduction meter averages less than 10dB gain reduction
(higher on the meter), or if the G
material is present, turn the A
If the AGC gain reduction meter averages more gain reduction (lower on
the meter), turn the A
f) Note the setting of the A
and set the A
g) When finished, reset AGC to D

5. Adjust the Analog L/R Input Balance Control. (optional)

[Skip this step if the channels are already balanced satisfactorily.]
[This step can only be accurately performed with test tones.]
A) Click the P
ROCESSOR
ONFIGURATION
tab.
L/R I
fader to make the M
NPUT
L/R I
NALOG
L/R I
fader to the same value.
NALOG
NPUT
.
NABLED
M
tab.
IXER
L/R I
fader to make the AGC G
NPUT
NALOG
L/R I
NALOG
NPUT
L/R I
NALOG
L/R I
fader to the same value.
NALOG
NPUT
ISABLED
tab.
M
IXER
tab.
O
IXER
UTPUT
fader. Click the D
NPUT
tab.
ONFIGURATION
R
AIN
EDUCTION
R
AIN
indicator stays on when program
ATE
fader up.
L/R I
NPUT
fader down.
fader. Click the D
NPUT
, if required.
ORBAN MODEL 1100
meter indicate
M
tab
IRECT
IXER
meter (on
me-
EDUCTION
M
tab
IRECT
IXER

Advertisement

Table of Contents
loading

Table of Contents