CONTROL SYSTEM
12.11
Forced Operation
Forced operation allows units to start, stop and operate in Cooling or Heating in pre-set
temperature according to the following table:
Forced operation
Note:
•
While under the forced operation, the temperature compensation
schedule.
•
The forced operation is activated when the mode button on the
Display Board is used to switch the unit to Cool or Heat mode.
•
The IFAN is always set to Autofan Speed in forced operation.
12-24
mode
Cooling
Heating
CONTENTS
Pre-set Temp for :
WMF, WMN, WNG models
22°C
28°C
SM DELTA 1-E.0 GB