Tubing Connections - Electra DELTA 18ST Service Manual

INTRODUCTION
1.4 Filtration
The DELTA series presents several types of air filters:
Easily accessible, and re-usable pre-filters (mesh).
Pre-charged electrostatic filter (diposable).
Active carbon filter (optional).
Active Electro Static re-usable filter (optional).
1.5 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, provide complete operating function and programming. For further details
please refer to the Operation Manual, Appendix A.
1.6 Outdoor Unit
The DELTA outdoor units can be installed as floor or wall mounted units by using a wall
supporting bracket. The metal sheets are protected by anti- corrosion paint work allowing
long life resistance. All outdoor units are pre-charged. For further information please
refer to the Product Data Sheet, Chapter 2.
It includes :
Axial fan.
Outdoor coil with hydrophilic louver fins for RC units.
Compressor mounted in a soundproofed compartment.
Outlet air fan grill.
Service valves" flare" type connection.
Interconnecting wiring terminal block.
1.7

Tubing Connections

Flare type interconnecting tubing can be produced on site.
For further details please refer to the Installation Manual, Chapter 11.
1.8 Accessories
ASK (All Season Kit):
For low ambient working conditions in cooling, an ASK can be installed inside the outdoor
unit. This kit allows cooling operation down to outdoor temp of -10 oC by gradually
controlling the outdoor fan speed motor.
RCW Wall Mounted Remote Control
The RCW remote control is mounted on the wall, and controls the unit either as an
infrared remote control or as a wired controller. The wired controller can control up to 10
Indoor units with the same program settings and adjustments.
For further details please refer to Optional Accessories, Chapter 15.
1.9 Inbox Documentation
Each unit is supplied with its own installation and operation manuals.
1-2
CONTENTS
SM DELTA 1-E.0 GB