Installations And Circuits - Bavaria 42 CRUISER Manual For Use

Sailing Yacht Bavaria 42 Cruiser

2. Installations and circuits

2.1 Tanks and piping – water
2.1.1 Fresh water, drinking water –cold
The yacht has two water tanks with a capacity of altogether about 360 l. Fresh water is supplied via
a water inlet (with a blue cover) at the transom, port side and on the forecastle near the chain
locker. You can take water from the tank over a hose connection leading to the pressure water-
pump.
This pump, realising the complete cold water circulation, is fitted below the pantry. An interruption
of the operation of the pressure pump is done by cutting off all ducts. All pipes/hoses should be
checked for leaks if the pump continuous working though all ducts were cut off properly.
The pump is protected by a filter which should be regularly checked and cleaned if necessary.
Components:
1 Deck plate (inlet)
2 Tank ventilation
3 Water heater
4 Backflow of water heater
5 2 – way valve
6 Fresh water pump
7 Accumulator tank and pressure switch
8 Deck plate (inlet)
9 Tank venting
10 Engine circulation
11 Draining water heater
12 Shower
Note
Exchange the water in tank from time to time.
Additionally you should use common purifiers.
Einfüllstutzen
Tankentlüftung
Boiler
Rückfluss Boiler
2-Wegehahn
Frischwasserpumpe
Druckgefäß und Druckschalter
Einfüllstutzen
Tankentlüftung
Motorkreislauf
Entleerung Boiler
Cockpitdusche
18 of 43
Bavaria Yachtbau GmbH