Introduction - Oyster Vision III Operating Instructions Manual

Introduction

These instructions describe the functions and operation of the automatic satellite
system. Installation instructions can be found in the installation manual supplied
with the system.
Correct and safe operation of the system can only be ensured by following the two
sets of instructions, both for installation and operation.
Your automatic satellite system is an intelligent satellite-TV reception system which
can align itself towards a preset satellite automatically as long as the system is
located within the footprint of this satellite.
Scope of supply: Control device; control unit; exterior unit with antenna - with
optional SKEW pivoting unit for optimised reception;
Please ensure that the system always has a clear view to the south. In Europe,
all satellites are in an approximate position in the south.
If the satellite's signal beam is interrupted by obstacles such as mountains,
buildings or trees, the automatic aiming will not function and no TV signal will
be received.
The fi rst few pages of these instructions contain information about using the
general functions of your system, followed by an explanation of all the adjustment
options.
3