Language; Dimmer; Service Info - Oyster Vision III Operating Instructions Manual

Note! The vehicle's switched ignition voltage via terminal 15 has
ultimate priority. When the ignition is switched on or if the engine
is started, the antenna will always close and can only be operated
again after the ignition has been switched off.

Language

Selection of the language for the texts displayed on the control device.

Dimmer

Backlighting:
The backlighting can be adjusted in 16 increments between off (dark) and maximum
brightness.
The lighting period cannot be adjusted, and the backlighting switches off after
approx. 1.5 minutes to save power. The display remains active. The backlighting is
switched on with every time a button is pressed or is extended by the fi xed period.

Service info

This menu item provides information that is relevant for servicing purposes.
Revision no.
System type
Error state
e.g. „E*1--------"
16