Table of Contents
Advertisement
HOW TO CONNECT A CATV CABLE
If your recumbent bike has a Workout TV console, a CATV cable
must be connected to the recumbent bike for cable TV stations to
be viewed.
Locate the cable jack on the front of the recumbent bike. Connect
the CATV cable to the cable jack.
A satellite receiver, VCR, or DVD player can also be connected to
Cable Jack
the recumbent bike. Connect a CATV cable from the coaxial output
on your equipment (usually labeled TV OUT or RF OUT) to the
cable jack. Note: Audio/video equipment without coaxial outputs
(some satellite receivers and DVD players) will require an RF modulator to operate with the recumbent bike. RF
modulators and external CATV cables are not available from FreeMotion Fitness, but are available at electronics
stores. See the owner's manual included with the equipment you wish to connect to see whether an RF modula-
tor is needed.
H
U
C
OW TO
PGRADE THE
ONSOLE
Your recumbent bike has been pre-configured to operate with a Basic console and a Workout TV console (see
the drawings below). To learn about the features of the Basic console, see page 9. For information about the
state-of-the-art Workout TV console, see page 23.
To upgrade your console and expand the capabilities of your recumbent bike whenever you choose,
simply contact your local FreeMotion Fitness Sales Representative or call FreeMotion Fitness toll-free at
1-877-363-8449.
Basic
Workout TV
Console
Console
8
Advertisement
Table of Contents
