How To Assemble The Recumbent Bike - NordicTrack CEX22523 User Manual

H A
OW TO SSEMBLE THE
Assembly requires two persons. Set the recumbent bike in a cleared area and remove all packing materials. Do
not dispose of the packing materials until assembly is completed. Assembly can be completed using the
included tools.
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part. The second number refers to the quantity needed for assembly.
1/4" x 3/4" Socket 1/4" x 3/4" Button
Screw (64)–4
1. Push the excess console wiring down into the
Frame (1). Attach the Handlebar (3) to the Frame
with four 3/8" x 1/2" Button Screws (74). Make sure
that the wiring is not pinched between the
Handlebar and the Frame.
2. Attach the Seat Back (10) to the Seat Carriage (5)
with four 1/4" x 3/4" Socket Screws (64).
R
3/8" x 1/2" Button
Screw (67)–4 Screw (74)–4
B
ECUMBENT
3/8" x 3/4" Button
Screw (81)–2
1
Console
74
Wires
1
2
10
5
IKE
3/8" x 1 1/4" Button
Screw (76)–4
3
74
5
64