H
A
U
B
OW TO
SSEMBLE THE
PRIGHT
IKE
Assembly requires two persons. Set the upright bike in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly can be completed using the included
Allen wrench.
Insert the console wires down into the Frame (1) and
up into the Upright (3). Attach the Upright to the Frame
with six 3/8" x 1 1/4" Button Screws (53). Make sure
that the wires are not pinched between the Upright
and the Frame.
3
53
53
Console
53
Wires
1
5