Trouble In Use Of Finisher Fs-P03 - Olivetti d-COLOR MF3300 Maintenance Manual

4.7

Trouble in use of Finisher FS-P03

4.7 Trouble in use of Finisher FS-P03
Description of problem
The Finisher does not
function.
d-Color MF 3300/3800
Check points
-
Have you loaded paper
on which an image with-
out margins has been
printed?
Remedy
Turn the power of this machine off and on to re-
set the Finisher.
Paper on which an image without margins has
been printed will not be stapled because the sen-
sor cannot detect it. Do not load paper on which
an image without margins is printed.
4
4-15