●
DIGITAL KEY TELEPHONE / USER'S GUIDE
Using Dial By Name
Each station and speed dial number can be assigned to a name When names are programmed
Each station and speed dial number can be assigned to a name. When names are programmed,
you may select a speed dial number by the stored name.
Button
Press SPEED button twice.
●
On the display, you will see the following.
●
ICM : 1 U_SPD : 2 S_SPD : 3
Select desired type.
●
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will see the following.
●
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
Press the VOLUME button to see the next two names.
●
You may enter characters using the code in "Storing Dial by
●
Name". The LCD will display the first two names which match
your input.
To select the name in line 1, press HOLD/SAVE button.
●
To select the name in line 2, dial 2 and press HOLD/SAVE
●
button.
The call is placed automatically.
●
In GDK-16/20W,
Press SPEED button twice.
●
On the display, you will see the following.
●
ICM : 1 U_SPD : 2 S_SPD : 3
Select desired type.
●
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will see the following.
C
fi
●
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
Pressing VOLUME button, the cursor will be moved to the next
●
name. When the cursor points a name or a dial number to call,
press HOLD/SAVE button. Then, the stored number is dialed.
You may enter characters using the code in "Storing Dial by
●
Name". The LCD will display the first two names which match
your input. (You may delete the last letter of your input by
your input (You may delete the last letter of your input by
pressing CALLBK button.)
You can see the matched phone number by pressing FLASH
●
button while the name is displayed (toggle).
The call is placed automatically.
●
Procedures
DIAL BY NAME
DIAL BY NAME
ti
t
i h
d
d
29
KD, KD/E, LKD Series
ill
th f ll
i
Range