●
DIGITAL KEY TELEPHONE / ATTENDANT OPERATION
Attendant Clock Set
This feature allows the attendant to set the Time/Date without entering Admin Programming
This feature allows the attendant to set the Time/Date without entering Admin Programming.
Button
Press TRANS/PGM button.
●
Dial # 1.
●
Enter Date + Time. Enter as YYMMDDHHmm.
●
(YY= Year 00~99, MM= Month 01~12, DD= Date 01~31, HH= Hour 00~23,
mm= minute 00~59)
If there is no need to change date or time, press * key.
(YYMMDD + * or * + HHmm)
(
Press HOLD/SAVE button.
●
In GDK-16,
Press TRANS/PGM button.
●
Dial # 1.
●
Enter Date as MMDDYY (6 digits) and press HOLD/SAVE button.
●
Enter Time as military format (4 digits) and press HOLD/SAVE button.
●
If there is no need to change date or time, press HOLD/SAVE button to go to
the next step.
Changing Time/Date Format
Button
To change the date format on the LCD,
Press TRANS/PGM button.
●
Dial * 5.
●
The format toggles between DDMMYY and MMDDYY.
●
(YY : year, MM : month, DD : date)
Or using display, (Only in KD-33LD, KD/E-36LD, LKD-30LD)
Press the 5th menu key from the main menu to select PROGRAM.
●
Select the ATD PROGRAM key.
●
Press PAGE down (▼) key once. On the display, you'll see the following.
●
■
A>WAKE-UP SET
■
■
A>WAKE UP ERASE
A>WAKE-UP ERASE
■
A>PASSWORD ERASE
■
A>CHG DATE MODE
■
A>CHG TIME MODE
STA 102 (T)
▣
NOV 02
Select the CHG DATE MODE key.
●
The format toggles between DDMMYY and MMDDYY.
●
(YY : year, MM : month, DD : date)
T
To change the time format on the LCD,
h
Press TRANS/PGM button.
●
Dial * 6.
●
The format toggles between 12-hour mode and 24-hour mode.
●
Procedure
)
Procedure
■
■
■
■
■
■
▲
▼
01:40pm
th ti
f
t
th LCD
46
KD, KD/E, LKD Series