●
DIGITAL KEY TELEPHONE / USER'S GUIDE
LCD Language Change
Button
Button
Press TRANS/PGM button and dial 5 1 .
●
The language in LCD is changed into default value.
●
If pressing TRANS/PGM + 5 1 , the language in the LCD is
●
changed to the nation's language.
Alarm Reset
Alarm Reset
Button
To terminate alarm signal while idle state,
Dial 6 5.
●
Confirmation tone is heard and the alarm signal is terminated
●
at all assigned stations.
Or using display, (Only in KD-33LD, KD/E-36LD, LKD-30LD)
Press the 4th menu key from main menu to select FEATURE.
●
Press PAGE down(▼) key twice.
●
On the display, you will see the following.
■
ACC CO-GR(01-48)
■
ACC 1 CO(01-96)
■
UNIV NITE ANSWER
■
TIE ROUTE (01-30)
■
ALARM RESET
▣
NOV 02
Select ALARM RESET key.
●
Ring is stopped.
●
Two-way Recording
While a CO line call, you can record the conversation and it will be saved in its own mailbox.
Button
To record the conversation,
Press the programmed {RECORD} button.
●
To program the {RECORD} button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] + # 4 +
[HOLD/SAVE]
To finish the recording,
Press the programmed {RECORD} button again. Or, replace
●
the handset.
(*)
Procedures
Procedures
Procedures
■
■
■
■
■
▲
STA 102 (T)
( )
▼
01:40pm
(Only in GDK-16/20W)
Procedures
38
KD, KD/E, LKD Series
Range
Range
Range
Range